UK Exports and Imports of Construction and Earthmoving equipment* – Q2 2017

UK exports of construction and earthmoving equipment continued on an upward trend in the second quarter of 2017, showing growth for the fourth consecutive quarter. Overall, Q2 2017 levels were the highest for two years, since Q2 2015. Exports in Q2 2017, increased by 5.3% in weight terms (tonnage of machines) compared with Q1 2017, and 2.0% in value terms (£ million), reaching £714 million. In the first half of 2017, exports are 19.1% higher than the same period in 2016 on a value basis at £1,413 million. On a weight basis, exports in the first half of the year are also 11% ahead of 2016 levels.
The increasing levels of exports of equipment can be attributed to both improving demand in many of the major overseas markets, as well as the benefit of the weaker £ exchange rate since the middle of 2016, following the Brexit referendum.
The USA remained the top destination for UK exports in the first half of 2017, accounting for 19% of total exports on a weight basis, and 23% on a £ value basis. Collectively, exports to EU28 countries accounted for 48% of total weight of machines exported in the first half of the year, and 44% of £ value. These were similar proportions to the 2016 annual levels.
Imports of equipment also showed further increases in Q2, and are following the same seasonal pattern as the last two years, “peaking” in Apr/Jun quarter, and “bottoming” in Oct/Dec. In Q2, imports showed a 4.3% increase on Q1 2017 in weight terms, and a 2.6% increase on a £ value basis, reaching £398 million. As with exports, imports were also at their highest level since Q2 2015 on both a weight and value basis. In the first half of 2017, imports are 15.8% higher than the same period in 2016 on a value basis at £786 million. On a weight basis, imports are also 3.4% ahead of 2016 levels in the first half of the year.
Higher levels of imports of equipment in the first half of the year are consistent with statistics on sales of equipment in the UK, according to the UK construction equipment data exchange.* This shows an increase of 6% in equipment sales in the first half of the year compared with the same period in 2016.
(* The UK construction equipment data exchange is operated by Systematics International Ltd., a specialist data processing company. The CEA has access to high level data from this scheme, via a partnership arrangement with Systematics.)
Japan remains the highest single country source of imports in 2017, accounting for 19% of total imports of equipment in the first half of the year on a value basis. Imports from Sweden also remain strong this year, accounting for 17% of total equipment imports, and have taken Sweden from 5th in the 2016 ranking to second place so far this year.
The UK remains a net exporter of construction and earthmoving equipment, measured in both weight and value terms. In Q2, the trade surplus increased slightly on Q1 levels to £316 million. This was lower than the surplus of £340 million in Q4 2016, but after this, was the highest quarterly surplus since Q4 2015.
uk trade by machine weight
uk trade by pound value
*Definition of equipment included in the analysis of export and import statistics
The data used in this report is taken from HMRC official trade statistics, and covers construction and earth moving equipment (excluding separate trade data for components and parts). Trade data has been used from 9 different HS (Harmonized System) codes. This consists of the following at the 4 digit level:
8413 – concrete pumps 8474 – crushing and screening equipment, and concrete, mortar and other types of mixers 8479 – machinery for public works 8701 – track-laying tractors 8704 – dump trucks for off-highway use 8705 – concrete mixers 8426 – cranes (but excluding gantry cranes, overhead travelling cranes and ship derrick cranes) 8429 – construction and earthmoving equipment – including bulldozers, graders, scrapers, loaders, excavators, shovels, tamping machines and road rollers 8430 – pile driving and pile extracting equipment, tamping and compacting machinery

Paul Lyons – August 2017